The Tornado's frame has been completely revised to meet the new power and torque characteristic of the engine, without loosing any input from the original Tornado project.
REAR RADIATOR
This is one of the characterizing features of the Tornado. 50% of the weight is distributed to the front chasis of the bike in all riding conditions. The advantage being increased precision when riding and when entering bends.
REAR SUSPENSION
The shock absorber and the links have benefitted from recent racing experience. The measurements have been slightly modified to make the frame easier to manage adapting it to the new increased power and torque values.
FRAME
Some small improvements,for example the welding system and tube assembly are now more accurate.
The aluminum plates have been modified to make the Tornado 1130 more enjoyable and satisfying to ride.
Available in green.
RRP* $call
*Prices and specifications subject to change without notice. RRP does not include freight & PD.
| Specifications - Benelli Tornado Tre 1130 |
| Engine |
4 stroke, 3 cylinders in line, tilted forwards 15°, fitted with anti-vibration countershaft |
| Bore x stroke |
88 x 62 mm |
| Engine Displacement |
1130 cc |
| Compression ratio |
|
| Cooling system |
Water cooling with rear mounted radiator, with two electric cooling fans |
| Oil cooling system |
With radiator |
| Distribution |
Chain driven double head cam shaft with 4 valves per cylinder |
| Lubrication |
Wet sump |
| Max power/rpm |
120 kW at 10,500 rpm |
| Max torque/rpm |
124 Nm at 800 rpm |
| Carburretion |
Electronic injection with 1 injector per cylinder |
| Ignition |
Single coil inductive discharge electronic ignition |
| Clutch |
Dry clutch |
| Gearbox |
6-speed extractable |
| Transmission |
Straight toothed primary gear, chain driven secondary |
| Exhaust system |
Stainless steel |
| Frame |
Mixed design. Front trusses in ASD tubular steel securely fitted with traction screws with aluminium alloy casting rear section. Steering head angle fixed 23.5° |
| Suspension |
Front: Marzocchi "upside down" fork diameter 50 mm, damping, rebound and spring pre-load adjustment. Rear: asymmetric swingarm, composed of cast aluminium and pressed in aluminium alloy, with "Extreme Technology" single shock absorber damping, rebound and spring pre-load adjustment. |
| Wheels |
Brembo cast aluminium alloy front 3.5"x17", rear 6.00"x17" |
| Tyres |
Tubeless, radial; Front 120/70 x 17" - 120/65 x 17"; Rear 190/50 x 17" - 180/55 x 17" |
| Brakes |
Brembo. Front: double floating disk, 320 mm diameter, with twin radial 4-piston caliper. Rear: single disk, 240 mm diameter, with twin piston caliper. |
| Dimensions |
Wheelbase 1419 mm; seat height 810 mm |
| Dry weight |
|
|
